W-A touch probeTP1-W-A
Wire it straight. Keep it clear.
- Connection
- Wired / axial exit
- Supply
- 5–24 V DC
- Repeatability
- 0.002 mm 2σ
Regular price$800.00 USD
Explore W-A touch probeModular CNC measurement equipment
Stop tinkering, start
measuring.
Our unique "no-M-code / no-ladder-edit" design lets you begin using precision CNC measuring equipment within minutes of wiring it in.
01 / Connect
Wired or infrared. Your choice.
02 / Configure
PNP output. NO or NC. Match your control.
03 / Get to work
No M-code. No ladder edits. Just a skip input.
Browse our products.
W-R touch probeTP1-W-R
One cable. Out the side.
- Connection
- Wired / radial exit
- Supply
- 5–24 V DC
- Repeatability
- 0.002 mm 2σ
Regular price$800.00 USDExplore W-R touch probeIR touch probeTP1-IR
No cable. Same reliability.
- Connection
- Infrared / receiver
- Supply
- 3.6 V / 1.2 Ah
- Repeatability
- 0.002 mm 2σ
Regular price$1,200.00 USDExplore IR touch probe
Same skip input. Same workflow. Every probe.Compare specifications
| Instrument | W-A touch probe | W-R touch probe | IR touch probe |
|---|---|---|---|
| Connection | Wired / axial exit | Wired / radial exit | Infrared / receiver |
| Repeatability | 0.002 mm 2σ | 0.002 mm 2σ | 0.002 mm 2σ |
| Output | PNP + NO / NC | PNP + NO / NC | PNP + NO / NC |
| Price | Regular price $800.00 USD | Regular price $800.00 USD | Regular price $1,200.00 USD |
Choose the connection that fits your machine setup.
All of our measuring equipment is powered by 5–24 V DC or a 1/2 AA lithium cell (SAFT LS14250). Trigger your control via either infrared or cable, using a PNP output set to NO or NC.
See how easy setup can be
Axial cable- Model:
- TP1-W-A
- Connection:
- Axial cable
- Output:
- PNP + NO/NC
- Supply:
- 5–24 V DC
Diagram
Industrial grade. Machinist ready.
Whether you need the robust structure of Siemens SINUMERIK and Mazak MAZATROL or the agility of a PC-based Mach4 setup. Keep your existing Macro B workflows on Fanuc, or switch gears and command the machine directly with a plain G31—no ladder edits required, just wire the skip input and get measuring.
Meet DynamiTech| Application | TP1 |
|---|---|
| Multidirectional measurement | Yes |
| Workpiece measurement | Yes |
| Tool measurement | Yes |
| Broken tool detection | Yes |
| Tool wear measurement | Yes |
| Tool length measurement | Yes |
| Tool diameter measurement | Yes |
| Thermal axis compensation | Yes |
| One-off and high-volume production | Yes |
Open documentation. Fewer obstacles.
Everything you need. Right where you need it.
More measuring. Less getting in the way.